Since 1999    

6378 Long Run Rd

Athens, OH 45701     

PH: 740.592.1553    

FAX: 614-452-4156

email: sales@tabletpress.net

Featured Presses:

 

TDP Benchtop Model Tablet Press
TDP-5 Benchtop Model Tablet Press
TDP-30 Benchtop Model Tablet Press
THP Flower-Basket Type Large Diameter Press

Also Available:

GZPK100A Series High-Speed Rotary Press
ZP100 Rotary Press
ZP35A/ZP37 Rotary Press
ZP33 Rotary Press

 

TDP - Benchtop Model Single-Punch Tablet Press

 

 

This unit is designed for pressing tablets from a variety of materials for research & development and for small-scale production of nutriceuticals, herbals, and other products. This is a bench-top unit, semi-portable, that is motor-driven but can also be hand-driven for adjustment and testing purposes. One punch & die set is included. Fill depth, tablet thickness, and punch pressure are all adjustable. This is by far our most popular unit.
European motors also available!

50-cycle (European) motors are an additional $100.

FAQ's

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Technical specifications: 

  • Dies: 1 set

  • Maximum Pressure: 1.5 KN (338lbs)

  • Maximum Dia. of Tablet: 12 mm

  • Minimum Dia. of Tablet: 2 mm

  • Maximum Depth of Fill: 11 mm (depends on density of material)

  • Maximum Thickness of Tablet: 6 mm

  • Production Capacity: 6000 pieces/hour

  • Motor: 110 volts @ 12 amps or 220 volts @ 6 amps, single-phase, or 220 volts @ 5.4 amps three-phase

  • Overall Size: 580 X 450 X 625 mm

  • Net Weight: Approximately 230 lbs.

  • Press color, style and weight may vary slightly, otherwise specifications will always be the same as shown.

 

Special Bonus: We make several special modifications to this press here in the U.S. to upgrade it substantially, at no extra cost to you! 

  1. Double-strength motor for a sweet, smooth-running press with extra pressure!
    comes wired for (your choice): 

  • 110 volts at 12 amps single phase (with power cord and plug), or

  • 220 volts at 6 amps single phase (with power cord and NEMA 6-15 plug), or

  • 220 volts at 5.4amps three phase (no power cord; customer must wire).

  1. Virtually indestructible U.S.-made drive-belt! No belt adjustment or replacement needed for years!

  2. Grease gun with FDA-Certified food grade grease (with teflon) installed to make maintenance a snap!
    We will happily supply you with a a grease gun preloaded with the same FDA-certified food safe grease for only $45.00 or a single replacement cartridge for $16.50 (shipping extra)

 

Price: $3,970

 

 

TDP-5 Benchtop Model Single-Punch Tablet Press

 

 

 

This is a heavy-duty benchtop unit, capable of producing tablets up to 20 mm in diameter (almost an inch). This is a new offering.
European motors also available!

50-cycle (European) motors are an additional $100.

Technical specifications: 

  • Dies: 1 set

  • Maximum pressure: 5 KN (1125lbs)

  • Maximum diameter of tablet: 20 mm

  • Minimum diameter of tablet: 3 mm

  • Maximum filling depth: 16 mm

  • Maximum tablet thickness: 8 mm

  • Production capacity: 5500 pieces/hour

  • Machine weight: 114 Kg (250 lb.)

  • Gross shipping weight: about 140 Kg (308 lb.)

  • Machine dimensions: 650 mm x 440 mm x 650 mm

  • Motor: 110 volts @ 12 amps or 220 volts @ 6 amps, single-phase, or 220 volts @ 5.4 amps three-phase

  • Overall Size: 650 x 440 x 650 mm

Special Bonus: We make several special modifications to this press here in the U.S. to upgrade it substantially, at no extra cost to you! 

  1. Double-strength motor for a sweet, smooth-running press with extra pressure!
    comes wired for (your choice): 

  • 110 volts at 12 amps single phase (with power cord and plug), or

  • 220 volts at 6 amps single phase (with power cord and NEMA 6-15 plug), or

  • 220 volts at 5.4amps three phase (no power cord; customer must wire).

 

  1. Virtually indestructible U.S.-made drive-belt! No belt adjustment or replacement needed for years!

  2. Grease gun with FDA-Certified food grade grease (with teflon) installed to make maintenance a snap!
    We will happily supply you with a a grease gun preloaded with the same FDA-certified food safe grease for only $45.00 or a single replacement cartridge for $16.50 (shipping extra)

Price: $5,970

 

 

TDP-30 Benchtop Model Single-Punch Tablet Press

 

 

 

 

This is an extra heavy-duty benchtop unit, capable of producing tablets up to 24mm in diameter (almost an inch).

This machine is widely used for pressing tablets in pharmaceutical, nutriceutical, chemical, herbal, candy,  and other related industries. It can press round  or special shaped tablets from various granular materials. Featuring precision filling, low-noise, low-consumption of material, and smooth operation, the minimum consumption of lab material is just 200g. It is  ruggedly designed, reliable and efficient for research and development labs, hospitals, industry and small scale production.


High Quality Punches and Dies

The mould and dies are processed with special alloy steel. The precision made dies of hardened steel are highly corrosion and abrasive resistant. This machine can operate with one die set (up to 20 mm), two punch sets (up to 10 mm each), or three punch sets (up to 7 mm each).

 

                        

 

Technical specifications: 

  • Maximum pressure: 30 KN (6750lbs)

  • Maximum diameter of tablet: 20 mm

  • Maximum filling depth: 16 mm

  • Maximum tablet thickness: 8 mm

  • Production capacity: single-punch: 3600 pieces/hr; double-punch: 7200 pieces/hr; triple-punch: 10800 pieces/hr

  • Machine weight: 160 Kg (352 lb.)

  • Gross shipping weight: about 170 Kg (374 lb.)

  • Machine dimensions: 708 mm x 459 mm x 740 mm

  • Motor: 110 volts @ 12 amps or 220 volts @ 6 amps, single-phase, or 220 volts @ 5.4 amps three-phase

  • Overall Size: 650 x 440 x 650 mm

Price: $8730

 

 

 

 

Large Diameter 30 or 50

Flower Basket Tablet Press

 

This is a medium-duty, continuous, automatic tablet press. It can be used for a wide variety of applications, including many for which the benchtop press can't generate adequate pressure. If you're producing tablets which will need to be coated, then this is the press you should purchase. It can press a variety of shapes and sizes, and can produce large tablets up to fifty millimeters (the maximum size for the benchtop press is 12 millimeters). As with the benchtop press, we provide a variety of operational upgrades.

            Flower-Basket Type Tablet Press Specifications

  Model

30 - (THP)

 

50 - (THP2)

  Max. Pressure

40 KN (4.5 tons)

 

100 KN

  Max. Dia of Tablet

30 mm

 

50 mm

  Max. Depth of Fill

25 mm

 

45 mm

  Max. Dia Circular Tablets

22 mm

 

35 mm

  Inner of Circular Tablets

5.10 mm

 

6-14 mm

  Depth of Fill Circular Tablets

25 mm

 

45mm

  Production Capacity

34.5 pcs/min

 

46 pcs/min

  Motor Power

1.1 KW

 

5.5 KW

  Net Weight

520 Kg

 

770 Kg

 

Price:

Model 30 (THP):  $7,450
Model 50 (THP2):  $16,500

 

 

GZPK100, 100A,

Series High-Speed Rotary Tablet Press

 

The GZPK100 series high-speed rotary tablet press includes the newest technological achievements, both mechanical and electronic, resulting in high production capacity, perfect tablet quality, accurate tablet weight, reduced waste, and compliance with GMP standards. The electronic controls are separate from the main machine.

Applications:

This machine can be used not only in the pharmaceutical industry but also in chemical, food, electronic, and cosmetic industries. The machine is designed for pressing tablets from various kinds of granular materials. It can press not only round tablets but also different geometrical shape tablets, including annular tablets. The tablets may have impressed characters or symbols on both sides. We can supply custom die sets for this machine.

 

Price: please inquire

 

 

ZP100 Series Rotary Tablet Press

 

 

The ZP100 rotary tablet press is a serial machine widely used by pharmaceutical and food industries to produce all kinds of round and irregularly-shaped tablets.

This series meets GMP standards. The pressing chamber is entirely separate from the drive system. The pressing chamber is paint-free, and all parts contacting powders and tablets are made of stainless steel or the surfaces are specially treated. The chamber is sealed with glass to prevent contamination.

The gear system, the guides and the major wearing parts are fully lubricated by a continual lubrication system. 

This machine can be equipped with special feeding devices to ensure proper feeding of a variety of specialty powders.

With this press, it's very easy to observe operation and to adjust the pressure, thickness, feeding, and speed via hand controls. All operational indicators are on the same side.

Most parts are universal in this series, so it's easy to obtain and change spare parts. The punch and dies meet IPT standards.

 

Price: please inquire

 
 

ZP35A, ZP37 Rotary Tablet Press

This fully-automatic machine is of the double-press type. The outside part of the machine is fully enclosed, the material of the cover and the inside table face being stainless steel. The turret face is specially designed to prevent contamination in order to meet GMP requirements.

Transparent observation windows permit clear viewing of press operation. The windows can be opened for ease of cleaning and maintenance. Drive speed and other adjustments are easily controlled, many of them adjustable during operation. All drive systems are enclosed in order to maintain high standards of cleanliness. The hydraulic system assures smooth, stable operation.

An overload protection unit prevents damage of the punches and other parts. When overload occurs, the machine stops automatically.

The punches and dies are also applicable to model ZP19, ZP33, ZP33B and ZP35.

Price:  ZP35A  - please inquire

 
 

ZP33 Rotary Tablet Press

This machine is of the double-press type. It consists of two sets of feed assemblies and a press-roller unit. The turret carries 33 sets of punches and dies, so 66 tablets will be pressed for each revolution of the turret. During operation, the speed of the turret rotation, the depth of the filling materials and the thickness of the tablets can be adjusted. The mechanical buffer unit protects punches and apparatus from overload damage. A powder suction unit is attached to take in the residual powder during the operation so that blockage by residual powder can be eliminated and the collected powder material can be reused.

Technical Specifications:

  • Dies: 33 sets
  • Max. Pressure: 40 KN (4.5 tons) 
  • Max. Dia. Of Tablet: 12 mm 
  • Max. Depth of Fill: 15 mm 
  • Max. Thickness of Tablet: 6 mm  
  • Turret Speed: 11-28 r/min 
  • Production Capacity: 43000-110000 pc/h 
  • Motor: 2.2 Kw 960 r/min 380V 50 Hz 
  • Overall Size: 930 X 900 X 1600 mm
  • Net Weight: 850 Kg 

Price: please inquire